Amateur Rink Boards

about this item:

• Hot-Dip Galvanized Steel Frames (3 inch x 1.5 inch @ 3mm thick).
• 1/2 inch Thick Opaque White High-Density Polyethylene (HDPE) board facing.
• 8 inch high, 1/2 inch Thick Yellow High-Density Polyethylene (HDPE) kickplate.
• 1/2 inch Thick, Blue High-Density Polyethylene (HDPE) caprail.
• Galvanized screws to fasten the board facing, kickplate, and caprail, powder coated to match the color, respectively.
• Each Typical Panel is 96 inch long and 42 inch high, with two (2) fastener holes on each vertical frame, and two (2) anchor holes at the bottom horizontal frame.
• These Amateur series boards are fabricated in a temperature-controlled room to eliminate the shrinkage of the HDPE material when installed at the ice rink site.
• Comes with standard or customized gates, equipped with heavy-duty, stainless hinges and latches.